Safety Portal - ACI NOV 2023 Near Miss Submissions

Table

Show your data in a spreadsheet-style report with rows and columns.

Kanban

Work with your data as cards in columns. Unavailable for this table because it has no valid multiple-choice or user fields.

Summary

Group and total your data to answer questions about large data sets.

Chart

Visualize your data in charts including pie, bar, line and others.

Map

Display records with an address as pins on a map.

Calendar

Organize records with dates in a calendar view.

Timeline

Display records with start and end dates in a timeline with a schedule.

Observation Date is on or after '11-01-2023' AND ...

	Incident Type	Incident Class	Details	Corrective Action

	Electrical Hazard	Failure to comply	Needed another track hoe to complete a tie in. In the process of tracking, the operator crossed under some power lines without a spotter and air horn per clients policy. Operator was stopped and advised of the policy.	Stop Work / Immediate Mitigation
	Lifting Hazard	Competent Person Issue	Crane setup in compressor station for a critical lift, I asked for crane to move off of old trench line and was ignored by the contractor. As the lift was being swung off center of the crane the outrigger started to sink into the old ditch line. Thankfully the crane was able to set the load down quick enough to keep from tipping over. Company safety man was called out and the crane was repositioned off the ditch line.	Stop Work / Immediate Mitigation
	Body Position Hazard	Body Position	Crew was cutting up a drag section with the bends welded in wrong while sitting on skids. After cutting loose from mainline crew were removing a 10' pup to roll seams. Upon cutting the pup the bend rolled on skids in turn falling off. The worker between pipe and ditch barely escaped from area before being knocked into ditch.	Stop Work / Immediate Mitigation
	Positive Observation	Daily Inspections	A Several times I checked Operator & Labor, using eye to eye contact, proper signals , great machine control . Very nice job at digging bell holes that are sloped correctly with entrance & egress.	Procedure review (Crew & Mgmt.)
	Mechanical Hazard	Unsafe behavior	Upon arriving at job-site found a welder using a grinder with a altered guard again after being warned one time already. Informed welding supervisor to remove him from job-site.	Stop Work / Immediate Mitigation

We're glad you're interested in doing more with Quickbase!

Now we need to make you official before you share apps or manage your account.

Verifying your email lets you share Quickbase with others in your company.

Your work email

Your company

Report Name *

Description

Show description on report page

Reports and Charts Panel

Each table has a panel listing its reports and charts, organized in groups.

This report will be listed only for you, in the group Mine.

Only you can see the report in the panel. You can't ever list it for other users. You can still let others open it by sending them links.

Please wait while your new report is saved...

Field label
Column heading override
Justification
What does auto mean?

Fields in:

Fields to Extract:

Name for the new table:
Items in the new table are called:

When you bring additional fields into a conversion, Quickbase often finds inconsistencies. For example, say you're converting your Companies column into its own table. One company, Acme Corporation, has offices in New York, Dallas and Portland. So, when you add the City column to the conversion, Quickbase finds three different locations for Acme. A single value in the column you're converting can only match one value in any additional field. Quickbase needs you to clean up the extra cities before it can create your new table. To do so, you have one of two choices:

If you want to create three separate Acme records (Acme-New York, Acme-Dallas and Acme-Portland) click the Conform link at the top of the column.
If the dissimilar entries are mistakes (say Acme only has one office in New York and the other locations are data-entry errors) go back into your table and correct the inconsistencies—in this case, changing all locations to New York. Then try the conversion again.

Read more about converting a column into a table.

Show fields from Show fields from Show fields from a related table

a table related to ""